CC1800XL WALK BEHIND SAW

Your choice of power options:

 

CC1800XL Walk Behind Saw

  • Large saw features in a easily maneuverable saw
  • Updated handle design with four rubber grips
  • Screw feed raise and lower mechanism
  • Available with push or hydrostatic transmission
  • Maximum cutting depth 7-5/8" with 20" guard
  • Handle adjusts to operators height
  • Left or right side sawing
  • Available with gas, electric or hydraulic power
  • Your choice of 14" or 20" blade guard

List Prices

Operator Manual

Parts List (Gas) Parts List (Electric & Hydraulic)

 

CC1800XL Specifications
Maximum Depth of Cut with 14" Blade 4-5/8"
Maximum Depth of Cut with 20" Blade 7-5/8"
Blade Shaft RPM 2,600
Blade Shaft Diameter 1-1/4"
Arbor Diameter 1" w/drive pin
Blade Shaft Drive

3belt (13HP), 4 belt (16 HP & up)
Blade Mounting right or left
Blade Raise and Lower Screw feed
Front Wheel Dimensions 5" x 2" x 1/2"
Rear Wheel Dimensions 6" x 1-1/2" x 5/8"
Handle Bars Adjustable Height and reversible
Transmission Eaton Model 6 or push
Drive Speed 0-80 feet per minute
Fuel Capacity 2 gallons
Electric Start 20 HP models only
Low Oil Alert Standard
Tach/Hour Meter Standard on 20 HP

 

CC1800XL Dimensions
Saw Height with Handlebar 42"
Minimum Length Pointer Up 36"
Maximum Length Pointer Down 72"
Saw Height w/o Handlebar 36"
Frame Width 16"
Frame Length 30-5/8"
Saw Width 22-3/8"
Front Axle Center Length 10-5/8"
Rear Axle Center Length 12"
Wheel Base Length 15-7/8"
Blade Shaft Maximum Height 13"